SCM系列鐵線調直切斷機

SCM Series Automatic Wire Straightening and Cutting Machine

設備主要特點

1.該設備主要用于將圓或扁的鐵線，不銹鋼線，鍍鋅線，鋁線，銅線等自動調直，按照設定長度，自動切斷。

2.有傳統機械式和數控液壓式兩種。

3.機械式鐵線調直切斷機，手動設定調直切斷長度，操作與維護都比較簡單。主要是用于調直切斷直徑小于10毫米,切斷長度小于2米的普通鐵線。

4.數控液壓式鐵線調直切斷機，加工性能較強，幾乎可以加工任何直徑，任何長度的鐵線，自動化程度高，數控設定調直切斷長度，并設有裝置，自動計數停機系統。主要用于調直切斷建筑用冷軋螺紋鋼筋、熱軋鋼筋、熱軋圓鋼及冷軋圓鋼等。

Main Application and Characteristic

1.The equipment is mainly used for automatically straighten round or flat wire, stainless steel wire, galvanized wire, aluminum wire, copper wire,and cut automatically according to the preset length.

2.There are two kinds of models:Traditional Mechanical Model and Numerical Control Hydraulic Model.

3.Traditional Mechanical Model Automatica Wire Straightening and Cutting Machine,need to set the straightening and cutting length manually,then the machine will do that automatically.

Operation and maintenance are simple. It is mainly used for straightening and cutting the wire with diameter less than 10 mm and the maximum cutting length is less than 2 metres.

4.Numerical Control Hydraulic Model Automatica Wire Straightening and Cutting machine,processing performance is strong, almost can process any diameter, any length of wire, high degree of automation,automatically set straightening and cutting length,adopted with the safety device and automatic counting & stop system.Mainly used for straightening and cutting building cold-rolled steel wire and rebar, hot-rolled steel wire, hot-rolled round steel wire and cold-rolled steel bar etc..

技術參數

Technical Parameter

參數/型號

Parameter/Model

傳統機械式

Traditional Mechanical Model

數控液壓式

Numerical Control Hydraulic Model

SC0.8-2.5

SC2-5

SC5-9

SC9-12

SC4-12

SC6-14

SC8-16

鐵線直徑

Wire Diameter

0.8-2.5MM

2-5MM

5-9MM

9-12MM

4-12MM