圓管拋光機是對圓形金屬管材進行表面拋光和拉絲的專業設備，經過拋光后的管材表面可以達到鏡面效果。

Round tube polishing machine is a round metal pipe surface polishing and drawing of professional equipment, after polishing the surface of the pipe can achieve the mirror effect.

圓管拋光機的機組構成/The composition of the tube polishing machine：

拋光機組由上料架、拋光機、下料架等3部分組成。上料架負責將待拋光的管材放置好，然后向拋光機組送料。拋光機組主要是對管材進行外表面進行拋光，通過拋光輪和拋光蠟的結合，是管材表面達到鏡面效果。下料架就是負責將拋光后的管材進行集中收集，然后打包。

Polishing unit consists of loading frame, polishing machine, unloading rack and other three parts. The loading frame is responsible for placing the pipe to be polished and then feeding the polishing unit. Polishing unit is mainly on the outer surface of the pipe to be polished, through the combination of polishing wheel and polishing wax, the pipe surface to achieve mirror effect. The unloading rack is responsible for collecting the polished tubing and then packing it.

圓管拋光機工作原理/Working principle of tube polishing machine：

管材進入拋光機組后，下方由托板頂起，防止管材掉落，膠輪具有一定的斜角角度，同時由電機帶動轉動，方便管材在拋光過程中行進。拋光輪安裝在打磨筒的筒軸上，由電機驅動轉動，通過調節桿進行前后調節，對管材進行表面打磨。

After the pipe enters the polishing unit, the bottom is raised from the pallet to prevent the pipe from falling, the rubber wheel has a certain angle of inclination, and is driven by the motor to facilitate the pipe to travel in the polishing process. The polishing wheel is mounted on the cylinder shaft of the grinding drum, and is rotated by the motor, through the adjustment rod before and after the adjustment, the surface of the pipe grinding.

圓管拋光機參數/RoundPipe Polishing Machine Parameters: