錐管機，也叫收口機，是將管材按照一定錐形角度進行管徑和口型收縮的設備。機器模具更換簡單，在相應的模具配合下，可加工不同口徑的金屬管，滿足不同需求。

Cone pipe machine, also known as the shrink mouth machine, is the pipe according to a certain cone angle of the diameter and mouth contraction of the equipment. Machine mold replacement is simple, in the corresponding mold with, can be processed with different caliber metal pipe to meet different needs.

錐管機工作原理/The working principle of the cone shrinkage machine：

管材外部的錐形是由模具決定的，壓花機的模具由個模具組成，模具卡在機體卡槽內，內部由4塊楔形鐵鑲嵌，楔形鐵在擠壓前手動調整好擠壓的角度，電機轉動后，帶動模具在管材周?chē)D(zhuǎn)動擠壓，壓鑄成型后，管材向后抽出即可。

The outer cone of the pipe is determined by the mold, the embossing machine mold consists of a mold, the mold card in the body card slot, the internal by four wedge-shaped iron inlay, wedge iron in the extrusion before the manual adjustment of the extrusion angle , The motor rotation, driving the mold around the pipe in the extrusion, die-casting molding, the pipe can be pulled back.

錐管機參數/Cone shrinkage machine parameters