預制生態框模具的作用性是基于制作混凝土生態框預制件而開發的大型模具，所以此模具的材質都是以鋼板為主，配合不同樣式的花紋結構，滿足多種護坡工程的需求，常見的生態框有階梯式、植草式、魚巢式等。生態框模具在水利工程和山體護坡等方面都有著較為廣泛應用，這與其豐富的形狀規格和簡單方便的生產方式是分不開的：1.體型較小的預制生態框模具主要有平鋪式的模具，其尺寸多為108cm*108cm，由鋼材質的內模和外模共同組成，在使用時需要現將其拼接起來，生產出的生態框預制件四周都帶有標準大小的孔洞，這樣的生態框是專門放置在河道或池塘底部的，因?yàn)檫@種結構既可以防止河道底部水土流失，又可以保證水底植被的生長，不會影響水底生物的生存，有著生態友好的特性；2.梯形較大的生態框模具有植草式、魚巢式和階梯式三種，此類模具的長度多可以達到2m，寬度一般在1m左右，深度多在50cm，如果有特殊要求也可以定制打造15cm或者30cm的，客戶可以根據工程需要進行選擇。此類模具也是由內模和外模組成的，為了滿足美觀需要，往往會使用工程聚丙烯制作外模，因?yàn)槭褂眠@種材料更容易制作出仿石花紋，使產出的生態框預制件更加美觀，安裝時還可以在生態框內部種植花草，達到美化環境的效果。
The function of the prefabricated eco frame mold is a large mold developed based on the production of the prefabricated concrete eco frame. Therefore, the material of the mold is mainly steel plate, with different pattern structures, to meet the needs of a variety of slope protection projects. The common eco frames are ladder type, grass planting type, fish nest type, etc. Eco frame mould is widely used in water conservancy projects and mountain slope protection, which can not be separated from its rich shape specifications and simple and convenient production methods: 1. The small prefabricated eco frame mould mainly consists of flat mould, with the size of 108CM * 108CM, which is composed of steel internal mould and external mould. When using, it needs to be spliced to produce The prefabricated parts of the ecological frame are provided with standard size holes around, such ecological frame is specially placed at the bottom of the river or pond, because this structure can not only prevent water and soil loss at the bottom of the river, but also ensure the growth of the underwater vegetation, and will not affect the survival of the underwater organisms, with the characteristics of ecological friendliness; 2. The trapezoid large ecological frame has grass planting and fish nest There are three types of molds, i.e. the length of such molds can reach 2m, the width is generally about 1m, and the depth is mostly 50cm. If there are special requirements, you can customize 15cm or 30cm, and the customer can choose according to the needs of the project. This kind of mold is also composed of internal mold and external mold. In order to meet the aesthetic needs, engineering polypropylene is often used to make the external mold, because it is easier to make stone like patterns with this material, so that the prefabricated parts of the ecological frame are more beautiful. When installing, flowers and plants can be planted in the internal part of the ecological frame to achieve the effect of beautifying the environment.