模具中澆筑泥漿進行生產的話，整個的生產時間是非常短的，同樣在有限的時間之內平鋪式框格護坡模具是能循環使用的，不用擔心模具使用不方便的問題，那么我們在進行加工的過程中，需要做到的就是按照科學的生產方式進行加工處理，因為只有這樣才是能夠保證整個預制件的生產完整。之后在加工的時候震動的處理時非常重要的，因為泥漿在混合攪拌的過程中會接觸到大量的空氣，同時也會產生大量的氣泡，如果這些的氣泡不能夠順利的排出去，那么會讓生產出來的護坡磚預制件，在使用的時候硬度和強度達不到合格的標準，并且在外觀上還會有著大量的空洞。所以平鋪式框格護坡模具的各個生產環節是需要嚴格控制的，首先來說通過模具生產的預制件他需要達到三點，就是硬度、美觀度和抗壓性，這三點是比較重要的，因為預制件需要在戶外長時間的進行安放，如果出現預制件不合格的問題，那么整個工程就無法在進行下去了，同樣對于平鋪式框格護坡模具來說也是一種磨損和傷害。

If we pour mud into the mold for production, the whole production time is very short. Similarly, the flat frame slope protection mold can be recycled in a limited time, so we don't need to worry about the inconvenient use of the mold. So in the process of processing, what we need to do is to process according to the scientific production method, because only in this way can we Ensure the complete production of the whole prefabricated parts. After that, it is very important to deal with the vibration during the processing, because the mud will contact with a lot of air in the mixing process and generate a lot of bubbles at the same time. If these bubbles cannot be discharged smoothly, then the hardness and strength of the pre-made parts of the produced slope protection bricks will not reach the qualified standard when they are used, and the appearance will also There are a lot of holes. Therefore, each production link of the flat frame slope protection mold needs to be strictly controlled. First of all, the prefabricated parts produced through the mold need to achieve three points, namely, hardness, aesthetics and compression resistance. These three points are relatively important, because the prefabricated parts need to be placed outdoors for a long time. If the prefabricated parts fail to meet the requirements, the whole project will not be in progress Going on, it is also a kind of wear and damage for the flat frame slope protection mold.