隔離墩模具特點介紹-隔離墩模具方案 隔離墩模具介紹是在長期生產此類模具的基礎之上，按照50、100、200厘米長度的生產標準，將以便捷性為出發點，基本上每套模具都會有翻轉結構，這樣在脫模的時候比較省事一些。隔離墩模板介紹主要是針對其模板加工、使用等環節而言，來進行生產加工的時候，為了使得該模具整體的成型效果會比較好，我們大多會選擇使用電焊機等機器設備來對模具整體來進行加工工作，這樣可以比較好的保證模具之間的連接緊密，不存在縫隙等問題。為了使隔離墩模具在工程中容易進行使用，我們?cè)谄浔砻婧附由狭朔D(zhuǎn)軸，這樣無論是模具的脫模工作，還是其在工程中來進行搬運的時候，都會更加的方便。模具一般根據客戶提供的設計圖紙來進行生產，所以生產出來的隔離墩模具整體符合工程的要求，生產出來的產品其規格是符合工程需要的。在對模具進行加工的時候，為了方便安裝，我們選擇了整體焊接的方式來對鋼板進行固定，這樣模具整體的固定效果就會比較好，也不會出現混凝土漿料泄露的情況，能夠在工程中長期來進行使用。 ntroduction to the characteristics of isolation pier mold - isolation pier mold scheme the introduction of isolation pier mold is based on the long-term production of such molds. According to the production standards of 50, 100 and 200 cm length, it will take convenience as the starting point. Basically, each set of molds will have a turnover structure, so it will be easier to take off the mold. The introduction of isolation Pier Formwork is mainly for the processing and use of formwork. In order to make the overall forming effect of the mold better, we mostly choose to use electric welding machines and other machinery and equipment to process the mold as a whole, so as to better ensure the tight connection between molds, There are no gaps and other problems. In order to make the mold of the isolation pier easy to use in the project, we welded a turnover shaft on its surface, so that it will be more convenient for both the demoulding of the mold and its handling in the project. Molds are generally produced according to the design drawings provided by customers, so the isolation pier molds produced meet the requirements of the project as a whole, and the specifications of the products produced meet the needs of the project. When processing the mold, in order to facilitate installation, we chose the overall welding method to fix the steel plate, so that the overall fixing effect of the mold will be better, there will be no leakage of concrete slurry, and it can be used in the project for a long time. Introduction to the characteristics of isolation pier die - isolation pier die scheme